ftp_set_option
Use ftp_raw() (PHP 5+) instead of ftp_site() if you need the results of the remote command.
ftp_site
(PHP 4, PHP 5)
ftp_site — EnvÃa un comando SITE al servidor
Descripción
bool ftp_site
( resource $secuencia_ftp
, string $comando
)
ftp_site() envÃa el comando SITE dado al servidor FTP.
Los comandos SITE no se encuentran estandarizados, y varÃan de un servidor a otro. Son útiles para la gestión de cosas como permisos de archivos y membresÃas de grupos.
Lista de parámetros
- secuencia_ftp
-
El identificador de enlace de la conexión FTP.
- comando
-
El comando SITE. Note que este parámetro no es escapado, asà que pueden haber problemas con nombres de archivo que contengan espacios y otros caracteres.
Valores retornados
Devuelve TRUE si todo se llevó a cabo correctamente, FALSE en caso de fallo.
Ejemplos
Example #1 EnvÃo de un comando SITE a un servidor ftp
<?php
/* Conectarse con el servidor FTP */
$con = ftp_connect('ftp.example.com');
if (!$con) die('No fue posible conectarse con ftp.example.com');
/* Iniciar sesion como "usuario" con la contrasenya "pass" */
if (!ftp_login($con, 'usuario', 'pass')) die('Error iniciando sesion en ftp.example.com');
/* Aplicar el comando "SITE CHMOD 0600 /home/usuario/archivoprivado"
* al servidor ftp */
if (ftp_site($con, 'CHMOD 0600 /home/usuario/archivoprivado')) {
echo "Comando ejecutado satisfactoriamente.\n";
} else {
die('El comando ha fallado.');
}
?>
add a note
User Contributed Notesftp_site
Marc
05-Aug-2003 04:02
05-Aug-2003 04:02
webmaster at beezm dot net
18-Jun-2003 08:52
18-Jun-2003 08:52
I wrote some functions for an ftp server for windows called GuildFTPd.
Here they are, they are pretty much so self explanitory:
<?
function guildftpd_adduser($ftp_stream,$group,$username,$password){
ftp_site($ftp_stream,"SITE ADDUSER $group $username $password");
}
function guildftpd_addgroup($ftp_stream,$groupname){
ftp_site($ftp_stream,"SITE ADDGROUP $groupname");
}
function guildftpd_deluser($ftp_stream,$username){
ftp_site($ftp_stream,"SITE DELUSER $username");
}
function guildftpd_addpath($ftp_stream,$username,$path,$vpath){
ftp_site($ftp_stream,"SITE ADDPATH $username $path $vpath");
}
function guildftpd_delpath($ftp_stream,$username,$path,$vpath){
ftp_site($ftp_stream,"SITE DELPATH $username $path $vpath");
}
function guildftpd_anon($ftp_stream){
ftp_site($ftp_stream,"SITE ANON ALLOW");
}
function guildftpd_anond($ftp_stream){
ftp_site($ftp_stream,"SITE ANON DENY");
}
function guildftpd_chpass($ftp_stream,$user,$pass){
ftp_site($ftp_stream,"SITE CHPASS $user $pass");
}
function guildftpd_disable($ftp_stream,$user){
ftp_site($ftp_stream,"SITE DISABLE $user");
}
function guildftpd_enable($ftp_stream,$user){
ftp_site($ftp_stream,"SITE ENABLE $user");
}
function guildftpd_who($ftp_stream){
$who = ftp_site($ftp_stream,"SITE WHO");
}
function guildftpd_kick($ftp_stream,$user);
ftp_site($ftp_stream,"SITE KICK $user");
}
function guildftpd_msg($ftp_stream,$text);
ftp_site($ftp_stream,"SITE MSG $text");
}
?>
to at mail dot isec dot pt
21-Nov-2002 02:20
21-Nov-2002 02:20
Hya,
Recently I had to work with FTP over PHP, since I didn't found any help about this topic I decided to post this here. If you need to chmod one file, I tested this on the ftp server using a ftp client and after I knew that the ftp server supported chmod I used the following commands:
$upload = ftp_put($conn_id, "/home/to/public_html/index.php", $source_file, FTP_ASCII);
$ch=@ftp_site($conn_id,"chmod 755 /home/to/public_html/index.php");
Hope this help!
Tó
daemorhedron
17-Nov-2002 02:32
17-Nov-2002 02:32
I'd like to follow up with Ivan's observation there. Unless I am missing the obvious, which is entirely possible of course, this command is quite useless unless it returns the data from the SITE <foo> request.
Besides the obvious SITE HELP command, another one that would require catching the feedback would be the SITE LOCATE | SITE SEARCH commands. I completely recognize that SITE <foo> commands are indeed insanely proprietary, but the fact still remains that changing this to return the results, or at least having the option to do so (such as exec() and the like) would be vastly preferred to the current method of returning true/false values.
Thanks.
29-Jun-2001 06:36
site commands are extra-functionality provided by some ftp servers, and depend on the server :
e.g. trying "ftp> site help" (with an interactive ftp client) on a proftp server would give :
214-The following SITE extensions are recognized:
RATIO -- show all ratios in effect
The following SITE commands are recognized (* =>'s unimplemented).
HELP CHMOD
214 Direct comments to admin@ftp.blahblah.fr
while with wu-ftpd on can typically get :
214-The following SITE commands are recognized (* =>'s unimplemented).
UMASK GROUP INDEX GROUPS
IDLE GPASS EXEC CHECKMETHOD
CHMOD NEWER ALIAS CHECKSUM
HELP MINFO CDPATH
214 blabla
Unfortunately, ftp_site only returns true or false. It would be nice to have a way to get the server's reply in full : ftp_site('help') return 1, which pretty much useless.
Hope that helps,
Ivan